?> Injection Kit Archives - Its Stock Bro https://itsstockbro.com/product-category/injection-kit/ Fri, 26 Jun 2026 06:21:17 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 https://itsstockbro.com/wp-content/uploads/cropped-ChatGPT-Image-Mar-26-2025-02_38_53-PM-32x32.png Injection Kit Archives - Its Stock Bro https://itsstockbro.com/product-category/injection-kit/ 32 32 AMS Performance INFINITI Q50/Q60 Port Injection Lower Manifold https://itsstockbro.com/product/ams-performance-infiniti-q50-q60-port-injection-lower-manifold/ Fri, 26 Jun 2026 06:21:17 +0000 https://itsstockbro.com/?post_type=product&p=12788 CARB And / Or EPA Compliance Testing Not Completed While we believe this product is either CARB EO exemption applicable, or complies with the EPA’s Anti-Tampering Policy, we have not completed the required testing and administrative process at this time. This product is not available to purchase for emissions-controlled vehicles located within the state of […]

The post AMS Performance INFINITI Q50/Q60 Port Injection Lower Manifold appeared first on Its Stock Bro.

]]> CARB And / Or EPA Compliance Testing Not Completed

While we believe this product is either CARB EO exemption applicable, or complies with the EPA’s Anti-Tampering Policy, we have not completed the required testing and administrative process at this time. This product is not available to purchase for emissions-controlled vehicles located within the state of California, or available to ship to California addresses, without a completed AMS Race Waiver form. International users outside of the United States should act in accordance with their local laws and regulations.

The AMS Performance INFINITI Q50/Q60 Port Injection Lower Manifold is the ultimate fueling solution for high horsepower applications. Working in conjunction with your existing direct injection system, adding port injection allows for a substantial increase in fuel capability than direct injection alone. Simply add in your preferred size injectors, plumb your fuel lines, and set up a controller to calibrate the system accordingly. Constructed of CNC machined 6061 T6 billet aluminum, the AMS Performance INFINITI Q50/Q60 Port Injection Lower Manifold is the foundation for your port injection build.

  • CNC Machined 6061 T6 Billet Aluminum Manifold Runners and Fuel Rails
  • Injector Nozzle Angle Designed to Maximize Fuel Delivery to Combustion Chamber
  • Designed for Bosch EV14k Type Injectors
  • Reuses OEM O-Ring Gaskets at Lower Manifold to Head Cases
  • Helps Prevent Carbon Build Up on Intake Valves
  • -6AN Ports on Rail Ends for Easy Fuel Line Creation
  • Fully Ethanol Compatible (e100, e85, e50, e30, etc.)

Engineered to be the Best

The AMS Snailworks© Engineering Team has designed the AMS Performance INFINITI Q50/Q60 Port Injection Lower Manifold to be a direct bolt-in install without hacking up your prized possession. Instead of creating a thin insert plate that does not allow for the proper injector spray angle, our team delivered a complete lower manifold solution that mounts the injectors vertically for the perfect flow path into the combustion chamber. Utilizing a pair of CNC machined billet -6AN fuel rails, our engineers have gone the extra mile to keep your VR30 looking and performing as it should.

Applications

  • 2017+ INFINITI Q60 with 3.0L Twin Turbo VR30DDTT
  • 2016+ INFINITI Q50 with 3.0L Twin Turbo VR30DDTT

Product Notes

  • Injectors, lines, controller, etc. not included. In order to complete this system, custom fuel lines and controller solution will need to be constructed. Custom calibration will also be required to operate port injection system once installed. AMS Performance does not offer any recommendations or instructions for this custom work.

The post AMS Performance INFINITI Q50/Q60 Port Injection Lower Manifold appeared first on Its Stock Bro.

]]> OEM Nissan Top Injector Cushion Spacer – KA24DE & SR20DET https://itsstockbro.com/product/oem-nissan-top-injector-cushion-spacer-ka24de-sr20det/ Thu, 04 Jun 2026 06:46:14 +0000 https://itsstockbro.com/?post_type=product&p=11919 OEM Nissan Top Injector Cushion Spacer – KA24DE & SR20DET Orders are usually processed within 24 hours. Those placed on weekends and holidays will begin processing at the start of the next business day. If you need to receive any part by a certain deadline, or within an urgent timeframe, please call or email us […]

The post OEM Nissan Top Injector Cushion Spacer – KA24DE & SR20DET appeared first on Its Stock Bro.

]]> OEM Nissan Top Injector Cushion Spacer – KA24DE & SR20DET

  • Orders are usually processed within 24 hours. Those placed on weekends and holidays will begin processing at the start of the next business day.
  • If you need to receive any part by a certain deadline, or within an urgent timeframe, please call or email us so we can verify the ready availability of the item(s) in question.
  • At Enjuku racing, we are pleased to ship orders to any location in the world.
  • Most customers within the 48 continental United States receive their orders within 7-10 business days.
  • We ship most orders via FedEx Ground. All orders outside the continental United States are subject to higher shipping costs.

The post OEM Nissan Top Injector Cushion Spacer – KA24DE & SR20DET appeared first on Its Stock Bro.

]]> Water/Methanol Injection Kit – Multi Input https://itsstockbro.com/product/water-methanol-injection-kit-multi-input/ Mon, 01 Jun 2026 10:35:35 +0000 https://itsstockbro.com/?post_type=product&p=11617 affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms For Naturally Aspirated Engines Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas […]

The post Water/Methanol Injection Kit – Multi Input appeared first on Its Stock Bro.

]]> affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms

For Naturally Aspirated Engines

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning.

This AEM kit has more features and components than any other comparably priced injection kits on the market.

  • 1 Gallon tank with built in low level switch
  • Easy to Use Controller
  • “Boost Safe” readiness safety system
  • Check valve integrated into nozzle to prevent unintended fluid flow
  • One injector and two nozzles to cover a wide range of HP levels
  • High Pressure 200psi Recirculation-style pump
  • LED dash light for system status and low fluid warning
  • 20 ft. of injection tubing

AEM V2 W/M Injection Kit, Multi Input Controller – 0-5v/MAF Frequency Or Voltage/Duty Cycle/Ext MAP, 1 Gallon Reservoir, Conductive Fluid Level Sensor

This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

The post Water/Methanol Injection Kit – Multi Input appeared first on Its Stock Bro.

]]> Snow Performance 7 Gallon Reservoir https://itsstockbro.com/product/snow-performance-7-gallon-reservoir/ Mon, 01 Jun 2026 09:56:12 +0000 https://itsstockbro.com/?post_type=product&p=11569 affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms Cross Reference SNO-40016 This Part Fits the Following Vehicles Make Model Submodel Engine Special Fitment Notes Audi All All All Use vehicle selector to confirm fitment BMW All All All Use vehicle selector to confirm fitment Mercedes Benz All All All Use vehicle […]

The post Snow Performance 7 Gallon Reservoir appeared first on Its Stock Bro.

]]> affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms

Cross Reference

  • SNO-40016

This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

The post Snow Performance 7 Gallon Reservoir appeared first on Its Stock Bro.

]]> Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit – no tank https://itsstockbro.com/product/boost-cooler-stage-2-5-progressive-water-methanol-injection-kit-no-tank/ Mon, 01 Jun 2026 09:28:38 +0000 https://itsstockbro.com/?post_type=product&p=11566 affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms Unlock 50-70 HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2.5 Boost Cooler water […]

The post Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit – no tank appeared first on Its Stock Bro.

]]> affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms

Unlock 50-70 HP on your boosted vehicle while decreasing your air temps by up to 100 degrees! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 2.5 Boost Cooler water methanol injection kit is available for all forced induction applications (Supercharged/Turbocharged). The Stage 2.5 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less water methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives a accurate delivery of water methanol and allows cooling and performance improvements over a wide range for improved drivability. Especially helpful for direct injected engines to remove 100% of carbon build up on the valves. Recommended for all street/strip driven forced induction vehicles using a turbo or centrifugal supercharger (Procharger/Vortech) looking for cooling over a wide range.

The VC-50 (ISO 9001 Manufactured) controller offers the functionality of a boost gauge and water methanol controller all in one! Highlighting a bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displaying boost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes directly on the screen. You can tailor the controller color to match your OEM gauges or mix and match up to two colors!

This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump “sleeve”. These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat greatly decrease pump life. The Stage 2.5 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak free operation even when using 100% methanol. Whether running a supercharger, turbo, or high compression motor the Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time!

NOT FOR TRUNK MOUNTING, SOLENOID(SNO-40060-BRD) AND LONGER FEEDLINE IS NEEDED IF MOUNTING IN THE TRUNK

Features:

  • U.S.A. Made
  • Adjustable Progressive Water Methanol Engagement & Monitoring
  • Digital Boost Reading (1-50 PSI)
  • Recommended For Street Driven Turbo and Centrifugal Supercharger Applications
  • Supports 1,000+ HP
  • 100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
  • Snow Performance Hyper-Sonic Water Methanol Nozzle
  • Snow Performance ACU-SEAL Water Methanol Compression Fittings
  • Snow Performance OEM Approved Extreme Environment 300 PSI UHO Water Methanol Pump
  • Snow Performance Running “S” Engraved Low Profile Nozzle Holder
  • Snow Performance Running “S” Engraved Low Profile High Flow Check Valve

This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

 

The post Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit – no tank appeared first on Its Stock Bro.

]]> Stage 3 Boost Cooler (EFI – Port Injection) – Nylon Line https://itsstockbro.com/product/stage-3-boost-cooler-efi-port-injection-nylon-line/ Mon, 01 Jun 2026 09:16:22 +0000 https://itsstockbro.com/?post_type=product&p=11555 affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms The Snow Performance Stage 3 Boost Cooler brings true two dimensional mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a two dimensional injection map based off boost and fuel injector pulse width to deliver a extremely […]

The post Stage 3 Boost Cooler (EFI – Port Injection) – Nylon Line appeared first on Its Stock Bro.

]]> affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms

The Snow Performance Stage 3 Boost Cooler brings true two dimensional mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a two dimensional injection map based off boost and fuel injector pulse width to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel injector pulse width into the mix allows the injection curve to be extended past specific boost points for greater range/control. Non-invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 1/4″ High Temp Nylon line and easy to install quick-connect fittings.

This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

 

The post Stage 3 Boost Cooler (EFI – Port Injection) – Nylon Line appeared first on Its Stock Bro.

]]> AEM V3 Water/Methanol Injector Kit https://itsstockbro.com/product/aem-v3-water-methanol-injector-kit/ Sat, 30 May 2026 07:13:57 +0000 https://itsstockbro.com/?post_type=product&p=11361 affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations. […]

The post AEM V3 Water/Methanol Injector Kit appeared first on Its Stock Bro.

]]> affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning.

Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

The post AEM V3 Water/Methanol Injector Kit appeared first on Its Stock Bro.

]]> Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit https://itsstockbro.com/product/boost-cooler-stage-2-5-progressive-water-methanol-injection-kit/ Sat, 30 May 2026 07:03:19 +0000 https://itsstockbro.com/?post_type=product&p=11360 This Part Fits the Following Vehicles Make Model Submodel Engine Special Fitment Notes Audi All All All Use vehicle selector to confirm fitment BMW All All All Use vehicle selector to confirm fitment Mercedes Benz All All All Use vehicle selector to confirm fitment MINI All All All Use vehicle selector to confirm fitment Porsche […]

The post Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit appeared first on Its Stock Bro.

]]> This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

The post Boost Cooler Stage 2.5 Progressive Water/Methanol Injection Kit appeared first on Its Stock Bro.

]]> Stage 3 Boost Cooler (EFI – Port Injection) / (Direct Injection)- Braided Line https://itsstockbro.com/product/stage-3-boost-cooler-efi-port-injection-direct-injection-braided-line/ Fri, 29 May 2026 12:00:27 +0000 https://itsstockbro.com/?post_type=product&p=11295 affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms The Snow Performance Stage 3 Boost Cooler brings true two dimensional mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a two dimensional injection map based off boost and fuel injector pulse width to deliver a extremely […]

The post Stage 3 Boost Cooler (EFI – Port Injection) / (Direct Injection)- Braided Line appeared first on Its Stock Bro.

]]> affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms

The Snow Performance Stage 3 Boost Cooler brings true two dimensional mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a two dimensional injection map based off boost and fuel injector pulse width to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel injector pulse width into the mix allows the injection curve to be extended past specific boost points for greater range/control. Non-invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 1/4″ High Temp braided line and easy to install quick-connect fittings.

This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

The post Stage 3 Boost Cooler (EFI – Port Injection) / (Direct Injection)- Braided Line appeared first on Its Stock Bro.

]]> Boost Cooler Stage 3 DI ProLine Water/Methanol Injection https://itsstockbro.com/product/boost-cooler-stage-3-di-proline-water-methanol-injection/ Fri, 29 May 2026 10:46:28 +0000 https://itsstockbro.com/?post_type=product&p=11233 affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an […]

The post Boost Cooler Stage 3 DI ProLine Water/Methanol Injection appeared first on Its Stock Bro.

]]> affirm Starting At 0% APR – Subject To Eligibility. See Lending Terms

The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle.

The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most.
Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control.
None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions
as a boost gauge, water-meth controller and fuel system monitor all in one!

Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling.

Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.

Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.

Cross Reference

  • SNO-320-BRD

This Part Fits the Following Vehicles

Make Model Submodel Engine Special Fitment Notes
Audi All All All Use vehicle selector to confirm fitment
BMW All All All Use vehicle selector to confirm fitment
Mercedes Benz All All All Use vehicle selector to confirm fitment
MINI All All All Use vehicle selector to confirm fitment
Porsche All All All Use vehicle selector to confirm fitment
Volkswagen All All All Use vehicle selector to confirm fitment

 

The post Boost Cooler Stage 3 DI ProLine Water/Methanol Injection appeared first on Its Stock Bro.

]]>