The post Dragy – GPS Based Performance Box DRG70 V2 appeared first on Its Stock Bro.
]]>Categories: ECU Tuning & Electronics, ECU Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics, Tuning & Electronics
Brand: Dragy
California Residents: Prop 65 Warning
Non-Emissions Related
This product is either entirely unrelated to an emissions-controlled engine, or we believe this product does not affect vehicle emissions or any emission control devices on the vehicle it is intended for, that would be subject to any US State or Federal emissions standards. International users outside of the United States should act in accordance with their local laws and regulations.
Monitor your 0-60mph, 60-130mph, 100-200kmh, 1/4 mile, 1/2 mile performance, and more!
Dragy uses high speed GPS satellites to accurately measure your vehicles performance within 1/100th of a second, producing identical results to the much more expensive and cumbersome systems, in a less expensive and easier to use package. The Dragy software automatically charts slope on all timeslips which you can then post to forums or social media, share with friends, or even upload to the Dragy leader board. The Dragy box is extremely compact at 1″ x 3″ (25.4mm x 76.2mm) and can be set on the dash when testing and stored in the glove box or center console when not in use.
In addition there are many advanced features under development including superimposing performance data over your mobile camera, virtual races with friends, an internal feed for photos and performance discussion, and more to come. Runs are saved in both metric and SAE formats, allowing comparisons of 100-200kmh and all metric equivalents. You can also define your own performance windows for measuring both trap speeds and/or elapsed times, time to brake performance such as 100-0, and much more.
The system can be run simultaneously with JB4 Mobile and other Bluetooth apps. Requires the Dragy app which is available free of charge for both iOS and Android.
Features
- Measure Acceleration, Braking Time, and Much More
- Lap Time (Available Soon)
- G-force Measurement
- Highscore List Sorted by Manufacturer
- Video Drag and Drop
- Profile (Garage, Profile Picture and Much More)
Product Includes
- Dragy Performance Box Lap and Accelerometer
- USB Charging Cable
- 2x Metal Plates and 3M Adhesive Strip
- Manual
Technical Data:
- iOS (8.0) or Android (4.4) Device Required
- 100hz Sample Rate
- Imperial and Metric Unit System Supported
- Connection type: Bluetooth 4.0
- Supports GPS and GLONASS
- Battery life: Up to 10 Hours
- Dimensions: 1.18″ x 3.14″ x 0.59″ (30 x 80 x 15mm)
With Leaderboards, Performance reports and Live feeds.
Dragy offers you multiple ways to compare your performance with all your friends, and enemies. Bragging rights has never been so easy to share!
Dragy Video
Record your racing with real-time performance and speed reports shown straight to your phone.
2 seconds
Dragy connects to its first GPS within 2 seconds of being turned on.
0.01 second fidelity. Never miss a moment.
10 hour battery life.
The post Dragy – GPS Based Performance Box DRG70 V2 appeared first on Its Stock Bro.
]]>The post Invidia 08-14 Subaru WRX Sedan Single N1 S.S.Tip Cat-back Exhaust appeared first on Its Stock Bro.
]]>Part number: HS08SW4GTP
Piping Diameter: 76mm
Exhaust Tip Diameter: 110mm
The post Invidia 08-14 Subaru WRX Sedan Single N1 S.S.Tip Cat-back Exhaust appeared first on Its Stock Bro.
]]>The post Boost Cooler Stage 3 DI ProLine Water/Methanol Injection appeared first on Its Stock Bro.
]]>The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle.
The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most.
Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control.
None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions
as a boost gauge, water-meth controller and fuel system monitor all in one!
Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling.
Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.
Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.
Cross Reference
- SNO-320-BRD
This Part Fits the Following Vehicles
| Make | Model | Submodel | Engine | Special Fitment Notes |
|---|---|---|---|---|
| Audi | All | All | All | Use vehicle selector to confirm fitment |
| BMW | All | All | All | Use vehicle selector to confirm fitment |
| Mercedes Benz | All | All | All | Use vehicle selector to confirm fitment |
| MINI | All | All | All | Use vehicle selector to confirm fitment |
| Porsche | All | All | All | Use vehicle selector to confirm fitment |
| Volkswagen | All | All | All | Use vehicle selector to confirm fitment |
The post Boost Cooler Stage 3 DI ProLine Water/Methanol Injection appeared first on Its Stock Bro.
]]>The post AEM Water/Methanol Injection System appeared first on Its Stock Bro.
]]>AEM’s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay.
The valve body features include 1/8” NPT ports with included push-to-lock ¼” hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It’s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using!
Features:
- High flow rating (3600 cc/min @ 150 psi)
- Low current draw (0.75A @ 13.5V)
- No additional relay required
- Standard 1/8”- 27 NPT inlet/outlet with included ¼” push-to-lock hose fittings for easy installation
- Fast response time
- Tested to 200 PSI
- Stainless steel enclosure and internals with EPDM seals for corrosion resistance
- Flying leads simplify connection with user desired connector
Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.
This Part Fits the Following Vehicles
| Make | Model | Submodel | Engine | Special Fitment Notes |
|---|---|---|---|---|
| Audi | All | All | All | Use vehicle selector to confirm fitment |
| BMW | All | All | All | Use vehicle selector to confirm fitment |
| MINI | All | All | All | Use vehicle selector to confirm fitment |
| Porsche | All | All | All | Use vehicle selector to confirm fitment |
| Volkswagen | All | All | All | Use vehicle selector to confirm fitment |
The post AEM Water/Methanol Injection System appeared first on Its Stock Bro.
]]>The post Boost Cooler Stage 2 Progressive Water/Methanol Injection Kit appeared first on Its Stock Bro.
]]>Keep those boost temps down with the Boost Cooler! The Snow Performance Stage 2 Boost Cooler water methanol injection kit is available for all forced induction applications (Supercharged/Turbocharged)
With a simple handheld display screen to set your injection points, this controller can be remotely mounted or placed in a convenient place to access based on your application. The VC-30 progressive controller with included digital display and manifold absolute pressure (MAP) sensor proportionally injects more or less water/methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting water/methanol according to boost pressure gives an accurate delivery allowing cooling and performance improvements over a wide range for improved drivability and cooling benefits. Especially helpful for direct injected engines to remove 100% of carbon build up on the valves. Recommend for all street/strip driven gas forced induction vehicles using a turbo or centrifugal supercharger looking for cooling over a wide range.
This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump “sleeve”. These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat greatly decrease pump life. The Stage 2 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak free operation even when using 100% methanol. Whether running a supercharger, turbo, or high compression motor the Stage 2 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time!Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.
Previous Revisions
- SN0-20010-BRD
Cross Reference
- SNO-20010-BRD
This Part Fits the Following Vehicles
| Make | Model | Submodel | Engine | Special Fitment Notes |
|---|---|---|---|---|
| Audi | All | All | All | Use vehicle selector to confirm fitment |
| BMW | All | All | All | Use vehicle selector to confirm fitment |
| Mercedes Benz | All | All | All | Use vehicle selector to confirm fitment |
| MINI | All | All | All | Use vehicle selector to confirm fitment |
| Porsche | All | All | All | Use vehicle selector to confirm fitment |
| Volkswagen | All | All | All | Use vehicle selector to confirm fitment |
The post Boost Cooler Stage 2 Progressive Water/Methanol Injection Kit appeared first on Its Stock Bro.
]]>The post Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol Injection Kit appeared first on Its Stock Bro.
]]>Keep those boost temps down with the Boost Cooler! The Snow Performance Stage 2 Boost Cooler water methanol injection kit is available for all forced induction applications (Supercharged/Turbocharged)
With a simple handheld display screen to set your injection points, this controller can be remotely mounted or placed in a convenient place to access based on your application. The VC-30 progressive controller with included digital display and manifold absolute pressure (MAP) sensor proportionally injects more or less water/methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting water/methanol according to boost pressure gives an accurate delivery allowing cooling and performance improvements over a wide range for improved drivability and cooling benefits. Especially helpful for direct injected engines to remove 100% of carbon build up on the valves. Recommend for all street/strip driven gas forced induction vehicles using a turbo or centrifugal supercharger looking for cooling over a wide range.
This kit utilizes the only OEM approved water methanol injection pump on the market with proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump “sleeve”. These sleeves will keep moisture around the pump unit leading to corrosion as well as trap heat greatly decrease pump life. The Stage 2 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak free operation even when using 100% methanol. Whether running a supercharger, turbo, or high compression motor the Stage 2 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels allowing full power all the time!
Features:
- U.S.A. Made
- Adjustable Progressive Water Methanol Engagement & Monitoring
- Recommended For Street Driven Turbo and Centrifigal Supercharger Applications
- Supports 1,000+ HP
- 100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
- Snow Performance Hyper-Sonic Water Methanol Nozzle
- Snow Performance ACU-SEAL Water Methanol Compression Fittings
- Snow Performance OEM Approved Extreme Environment 300 PSI UHO Water Methanol Pump
- Snow Performance Running “S” Engraved Low Profile Nozzle Holder
- Snow Performance Running “S” Engraved Low Profile High Flow Check Valve
Previous Revisions
- SP10231
This Part Fits the Following Vehicles
| Make | Model | Submodel | Engine | Special Fitment Notes |
|---|---|---|---|---|
| Audi | All | All | All | Use vehicle selector to confirm fitment |
| BMW | All | All | All | Use vehicle selector to confirm fitment |
| Mercedes Benz | All | All | All | Use vehicle selector to confirm fitment |
| MINI | All | All | All | Use vehicle selector to confirm fitment |
| Porsche | All | All | All | Use vehicle selector to confirm fitment |
| Volkswagen | All | All | All | Use vehicle selector to confirm fitment |
The post Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol Injection Kit appeared first on Its Stock Bro.
]]>The post Stage 2.5 Boost-Controlled Water/Meth Injection Kit appeared first on Its Stock Bro.
]]>Gauge Pod controller, for optimum control even from the driver’s seat!
The all new Stage 2 Boost Cooler
is the most advanced best selling gauge style water-meth system on the market today. Equipped with the new boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles independently of one another. This sophisticated injection strategy yields the highest increases in HP and cooling along all stages of the engine. The VC-50 comes with a dual 7 color OLED screen and displays boost, percentage of injection, low level, and 2 fault modes (clogged line/unplugged line) directly on the screen. If you are looking for the most advanced, high quality, U.S.A made water-methanol injection system for your boosted vehicle look no further than the Snow Performance Stage 2 Boost Cooler.
Key Features:
300 PSI UHO (Ultra High Output) Pump
- 3 Quart Reservoir
- All Tubing Necessary for Installation
- 20′ ¼ Inch High Temp Nylon Tubing
- 18″ High pressure Boost Line
- Progressive VC-50 Controller
- Pigtail Harness
- Level Switch Upgrade
- High Flow Check Valve
- 2 Hyper-Sonic Nozzles (#3 – 157mL/min & #5 – 375mL/min)
- Required Hardware Needed For Installation
- Snow Performance Running S Decal
- Comprehensive Instructions to Install on Any Forced Induction Vehicle
- Snow Performance 1-Year Warranty
Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.
Previous Revisions
- SN0-210
Cross Reference
- methanol
- snow
- 30-3000
- snow performance
- SNO-210
This Part Fits the Following Vehicles
| Make | Model | Submodel | Engine | Special Fitment Notes |
|---|---|---|---|---|
| Audi | All | All | All | Use vehicle selector to confirm fitment |
| BMW | All | All | All | Use vehicle selector to confirm fitment |
| Mercedes Benz | All | All | All | Use vehicle selector to confirm fitment |
| MINI | All | All | All | Use vehicle selector to confirm fitment |
| Porsche | All | All | All | Use vehicle selector to confirm fitment |
| Volkswagen | All | All | All | Use vehicle selector to confirm fitment |
The post Stage 2.5 Boost-Controlled Water/Meth Injection Kit appeared first on Its Stock Bro.
]]>The post VDO 5WK97004Z Mass air flow sensor appeared first on Its Stock Bro.
]]>Curabitur vitae porta odio. Nunc in justo non purus malesuada lacinia. In hac habitasse platea dictumst. Sed venenatis, arcu ac ultrices facilisis, augue velit malesuada ex, ac vestibulum ex mi at justo. Vestibulum sollicitudin euismod odio, a aliquet ex pellentesque et. Suspendisse euismod in erat ac dignissim. Etiam posuere, odio at bibendum iaculis, arcu sapien iaculis neque, id pellentesque tellus elit nec massa.
Fusce auctor bibendum ex, at elementum tortor auctor in. Sed pharetra odio in velit feugiat, id bibendum ipsum elementum. In tincidunt eleifend scelerisque. Nulla facilisi. Nulla facilisi. Fusce bibendum, turpis nec eleifend facilisis, ipsum ex facilisis justo, sit amet tristique turpis arcu et justo. Cras id aliquam lectus. Suspendisse potenti. Proin non turpis vitae felis tincidunt suscipit. Suspendisse laoreet bibendum nisl, a facilisis justo iaculis non.
The post VDO 5WK97004Z Mass air flow sensor appeared first on Its Stock Bro.
]]>The post RIDEX Sensor, coolant temperature appeared first on Its Stock Bro.
]]>Curabitur vitae porta odio. Nunc in justo non purus malesuada lacinia. In hac habitasse platea dictumst. Sed venenatis, arcu ac ultrices facilisis, augue velit malesuada ex, ac vestibulum ex mi at justo. Vestibulum sollicitudin euismod odio, a aliquet ex pellentesque et. Suspendisse euismod in erat ac dignissim. Etiam posuere, odio at bibendum iaculis, arcu sapien iaculis neque, id pellentesque tellus elit nec massa.
Fusce auctor bibendum ex, at elementum tortor auctor in. Sed pharetra odio in velit feugiat, id bibendum ipsum elementum. In tincidunt eleifend scelerisque. Nulla facilisi. Nulla facilisi. Fusce bibendum, turpis nec eleifend facilisis, ipsum ex facilisis justo, sit amet tristique turpis arcu et justo. Cras id aliquam lectus. Suspendisse potenti. Proin non turpis vitae felis tincidunt suscipit. Suspendisse laoreet bibendum nisl, a facilisis justo iaculis non.
The post RIDEX Sensor, coolant temperature appeared first on Its Stock Bro.
]]>